Seamaster Icon High Gloss Finish Paint ( Metal & Wood )
NOTE: The colours shown here are as close to actual paint colours as modern printing techniques allows.Due to different computer monitors/calibrations colours may vary slightly from the picture.
Physical Characteristics:
- Ingredients: modified alkyd resin, mineral extenders, pigments and additives
- Solvent : Mainly aliphatic hydrocarbon
- Density : 0.95-1.20 (kg/litre)
- Solid : Approximately 55%
- Viscosity : 100 –110 sec. (Ford Cup 4 at 27 ± 0.5°C)
- Coverage : 12-14 m2/litre
- Colours : Refer to colour card
- Gloss : Glossy
PROPERTIES:
- Recommended Dry Film Thickness : 25-30 microns per coat
- Drying Time : Touch dry : less or equal to 1 hours
- Hard dry : less or equal to4 hours
- Recoating Interval : > 4 hours
SURFACE PREPARATION:
- Wood Surface
- Metal Surface
- Previously Painted Surface
APPLICATION METHOD:
- Method of Application : Brush, roller or spray application
- Product Preparation : Ready for use after thoroughly stirring. However, if thinning isrequired, not more than10% of mineral turpentine may beadded for brush and roller application; and for sprayapplication up to 15-20% of mineral turpentine may be added.