Seamaster Icon High Gloss Finish Paint ( Metal & Wood )
Seamaster Icon High Gloss Finish Paint ( Metal & Wood ) Seamaster Paint Paint Selangor, Malaysia, Kuala Lumpur (KL), Kajang Supplier, Suppliers, Supply, Supplies | Logamjadi Sdn Bhd
  • High gloss enamel finishing paint
  • Fast drying with good levelling property for interior use
  • Recommended for interior use on both wood and metal surfaces
  • Economical
  • Quality Maintenance Paint
  • good colour retention

NOTE: The colours shown here are as close to actual paint colours as modern printing techniques allows.Due to different computer monitors/calibrations colours may vary slightly from the picture.






Physical Characteristics:

  • Ingredients: modified alkyd resin, mineral extenders, pigments and additives
  • Solvent : Mainly aliphatic hydrocarbon
  • Density : 0.95-1.20 (kg/litre)
  • Solid : Approximately 55%
  • Viscosity : 100 –110 sec. (Ford Cup 4 at 27 ± 0.5°C)
  • Coverage : 12-14 m2/litre
  • Colours : Refer to colour card
  • Gloss : Glossy



  • Recommended Dry Film Thickness : 25-30 microns per coat
  • Drying Time : Touch dry : less or equal to 1 hours
  • Hard dry : less or equal to4 hours
  • Recoating Interval : > 4 hours



  • Wood Surface
  • Metal Surface
  • Previously Painted Surface



  • Method of Application : Brush, roller or spray application
  • Product Preparation : Ready for use after thoroughly stirring. However, if thinning isrequired, not more than10% of mineral turpentine may beadded for brush and roller application; and for sprayapplication up to 15-20% of mineral turpentine may be added.

Please leave your enquiry here, we will reply as soon as possible.

*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version